SHEETtracs®

Especificaciones

  • Overview

    • Design recommendations
    • High strength of the screw joint due to the formed draught
    • High vibration resistance
    • Simple and safe assembly due to good alignment and low installation torque
    • High stripping torque due to a robust female thread
    • Circular thread cross section for maximised thread engagement
    • Metric compatibility

Hotline

Applications Engineer

IND-Teaser-CADundmehr2-EJOT.jpg

CAD & more on ejot.com

Con el registro único, proporcionamos en esta área datos CAD en varios formatos, así como PDF de los dibujos técnicos de nuestros productos DELTA PT®, SHEETtracs® y ALtracs® Plus. Adicionalmente, CAD & más le ofrece la opción de diseñar sus conexiones individuales con la ayuda de programas de pronóstico o verificar su viabilidad con "APPLICATION CHECKs". Además, recibirá folletos de productos actuales, publicaciones técnicas y los estándares de EJOT para descargar.


CAD & more

Reliable thin sheet metal joints

The reliable assembly of thin sheets with pilot holes has always presented a problem for removable joints. For sheets thicker than 1 mm it used to be possible to apply common sheet metal screws but an increasing reduction of sheet thickness, due to the cost saving potentials, prevents this today. EJOT now developed a secure solution for the process reliable assembly of pre-punched sheet metal joints with less 1,5 mm thickness, the self-tapping EJOT SHEETtracs® screw. This fastening element also supports the implementation of individual light weight desing strategies. For a example a reduction of the sheet thickness of casing walls of "white goods" became possible with the SHEETtracs® - an important factor for the weight and also cost optimisation of this product category.

Special thread layout

The EJOT SHEETtracs® features a 45° (30° / 15°) asymmetric flank angle and with less material displacement it creates a stronger female thread in the sheet. This increases the stripping torque level of the joint and enables multiple repeat assemblies. In the lower, tapered area of the screw, the flank angle is reversed, and the resulting through draught is formed mainly into fastening direction. The non-circular thread forming zone ensures easy, centred application and the raised thread areas ensure a secure penetration of the sheet material. The circular cross section in the upper, load bearing thread results in higher thread engagement in the sheet metal compared to non-circular thread geometries.

SHEETtracs® Application Check

EJOT SHEETtracs® es un tornillo autoroscante para uniones seguros de chapas finas sin agujero previo.


El Online-Tool SHEETtracs® Application Check da la posibilidad al usuario a calcular los valores indicativos relevantes para la fijación, introduciendo el material y el espesor de la chapa a atornillar. Estos valores son, entre otros, el diámetro  necesario del agujero previo o la recomendación del par de apriete para diferentes recubrimientos del tornillo.

SHEETtracs® WN 52 WN54 Head Styles and Drives

WN5241 round washer head with Z cross recess (or H)
WN5242 pan head with cross recess Z (or H)
WN5243 flat countersunk head with cross recess Z (or H)
WN5247 hexagon flange head
WN5251 round washer head with TORX®
WN5252 pan head with TORX®
WN5254 flat countersunk head with TORX®

For detailed information, please refer to the EJOT company standard.
You can download these in our service area "CAD & more".
Click here to register: "CAD & more"