Self-drilling Screws

JT2-D-12

JT2-D-12-5.5/6.3

Self-drilling Screws

Steel profiled insulated sandwich panels to hot rolled steel sections
JT6-FR-6-5,5

JT3-FR-6-5,5

Self-drilling Screws

Magazinstreifen-JT2-3-4_8_foto1

JT2-3-4.8x19 collated

Self-drilling Screws

profiled steel sheets to steel substrate
JT2-2H-Plus-5,5_Pos1

JT2-2H-Plus-5.5

Self-drilling Screws

Side lap stitching of profiled steel sheets
JT2-2H-3-4_8

JT2-2H/3-4.8

Self-drilling Screws

Side lap stitching of profiled steel sheet
JT2-6-5,5x25-V16

JT2-6-5.5

Self-drilling Screws

Profiled steel sheets to steel substructure
JT3-2-4_9

JT3-2-4.9

Self-drilling Screws

Profiled aluminium sheet to timber substructure
JT3-2H-4,8_foto1

JT3-2H-4.8

Self-drilling Screws

Side lap stitching of profiled steel / aluminium sheets and sandwich panels
[JT3-2-5_6

JT3-2-5.6

Self-drilling Screws

Profiled roofing and cladding sheets to timber sections
JT2-ST-2-6,0

JT2-ST-2-6.0

Self-drilling Screws

timbre on steel/aluminium substructure
JT3-2-6,0

JT3-2-6.0

Self-drilling Screws

profiled aluminium sheets to steel/aluminium/wood substructure
Bild

JT6-2H-Plus-5.5

Self-drilling Screws

Steel /aluminium profiled sheets to cassette system walls
EJOT_EJOFAST_JF3-FR-2_Pos-1_500x500

JF3-FR-2-5,5

Self-drilling Screws

amongst others clips to thin-walled steel substructures
JT3-18_Bild

JT3-18-5.5

Self-drilling Screws

with hardened steel drill point
JT3-ST-2-6,0

JT3-ST-2-6.0

Self-drilling Screws

amongst others, rail systems to steel/alu timber substructure
[JT3-DH-2H-6_5-7_0].png

JT3-D-2H-6.5/7.0

Self-drilling Screws

Sandwich panels to timber substructure
JT4-FZ-6,5

JT4-FZ-6.5

Self-drilling Screws

Fastening corrugated fibre cement sheets to timber substructure
JT3-X-2-6,0

JT3-X-2-6.0

Self-drilling Screws

Clips to steel/aluminium/timber substructure
JT4-S-2-4,8x38

JT4-S-2-4.8

Self-drilling Screws

Fastening timber laths to aluminium substructure
JT4-STS-3-4,8x35

JT4-STS-3-4.8

Self-drilling Screws

Fastening plaster-base sheeting to aluminium substructure
JT3-2-6,5

JT3-2-6.5

Self-drilling Screws

Profiled steel/alu sheets, sandwich and roofing sheets to timber substructure
JT4 FR 2H6 4.8 ACM  b.png

JT4-FR-2H/6-4.8

Self-drilling Screws

with centring bush
JT6-2_5-5,0-VARIO_Pos2

JT6-2/5-5.0 VARIO

Self-drilling Screws

To form floating and fixed points
JT4-FR-2-4,9

JT4-FR-2-4.9

Self-drilling Screws

Corrugated alu profile sheets and facade panels to timber substructure
JT3-LT-3-5,5x25-Pos2

JT3-LT-3-5.5

Self-drilling Screws

Clip fix fastener

 

 

 

EJOT self-drilling screws

The EJOT self-drilling screws feature a classic drill point. They drill, form the thread and fasten components in one work step. The self-drilling screws are completed by an optional pre-assembled sealing washer.

 

JT3/JT6 self-drilling screws made of stainless steel with hardened drill point

The EJOT self-drilling screws JT3 made of A2 stainless steel with hardened drill point made of zinc-plated steel are the economic solution for fastenings in unweathered areas. They are suitable for steel or aluminium components and are offered with a maximum drilling capacity of 18 mm. For special requirements, we offer the JT6 made of A4 stainless steel with hardened drill point.

 

JT2 self-drilling screws made of zinc-plated steel

The EJOT self-drilling screws JT2 made of case-hardened zinc-plated steel are the economic solution for fastenings in unweathered areas. They are suitable for steel components and are offered with a maximum drilling capacity of 18 mm.

 

JT4/JT9 self-drilling screws made of A2/A4 stainless steel

The EJOT self-drilling screws JT4/JT9 made of A2/A4 stainless steel are particularly suitable for fastening and fixing elements for rear-ventilated facade systems. They are the ideal solution to form sliding and fixed points on substructures of rear-ventilated facades. With a drilling capacity of up to 6 mm, they are above all suitable for aluminium components.

 

EJOFAST® screws - Fast. No swarf. Reliable.

EJOFAST screws are self-drilling screws without the conventional cutting bit. Due to the innovative point geometry and the special thread form, the EJOFAST screw not only fastens without any swarf and at high speed, it also features excellent clamping properties. The EJOFAST self-drilling screws are particularly suitable for the fastening of thin sheets. They are available in case-hardened zinc-plated steel and in A2 stainless steel with hardened drill point.

 

EJOFAST® self-drilling screw JF3-6.8

The new EJOFAST self-drilling screw JF3-6.8 is particularly suitable for the fastening of sandwich panels and trapezoidal profiles to timber substructures without any swarfs. The self-drilling screw drills through the sandwich panel or the trapezoidal profile virtually without any swarfs - thanks to its innovative combination thread which combines the positive characteristics of two different thread geometries. The point has the renowned EJOFAST thread geometry. This geometry grinds the wood fiber and replaces the pre-drilling. The thread merges into a wood screw thread with a diameter of 6.8 mm. Its high pitch diameter offers excellent pull-out values in wood.