EJOT Titelgrafik
Login Extranet

EJOT WSS and KERI

Renovation systems for rebuilding the stability of weather shells

Weather shells of prefabricated building elements (precast concrete slab-type construction) were installed with steel tie rods in front of the load-bearing wall. Due to corrosion influences the stability can be endangered. Thus before renovating the facade with ETICS, the stability needs to be rebuilt. EJOT offers two convincing systems.

Our special service for you:

For safety reasons, rebuilding the stability of a weather shell or a facing shell should be calculated by an engineer. Our technical service is happy to help you choose the right renovation solution and delivers all details necessary.

EJOT weather shell protection WSS

  • to rebuild the stability of weather shells of three-layered exterior wall panels
     
  • high-grade renovation specifically for the precast concrete slab-type construction
     
  • dry drilling method applicable
     
  • handling independent of the temperature
    (without mortar) 
     
  • immediately stressable
     
  • with European Technical Approval (ETA-99/0007)
 


Here you will find our European Technical Approval (ETA-99/0007).

 

Product range

fastening thickness B (≤ mm) product name
120 EJOT WSS 24 x 185
150 EJOT WSS 24 x 215

EJOT weather shell protection KERI

  • cone anchor to rebuild the stability of weather shells of three-layered exterior wall panels
     
  • high-grade renovation specifically for the precast concrete slab-type construction
     
  • handling independent of the temperature
    (without mortar)
     
  • immediately stressable
     
  • approved by the German Deutsches Institut für Bautechnik (Z-21.8-1265)
 

Here you will find our German Approval of the Deutsches Institut für Bautechnik
(Z-21.8-1265).
 

Product range

fastening thickness B (≤ mm) product name
128 EJOT KERI 40 x 205
163 EJOT KERI 40 x 240