EJOT Titelgrafik
Login Extranet

EJOT SDF-K plus 8 U

Specialist for rail systems on problematic substrates

  • approved for concrete, solid and perforated masonry
     
  • for installing fastening and holding rails 
     
  • universal expansion zone for problematic substrates and high tolerances 
     
  • premounted screw for quick installation
     
  • to compensate facade tolerances use
    spacers EJOT AS
 

Here you will find our European Technical Approval (ETA-04/0064) and
our German Approval of the Deutsches Institut für Bautechnik (Z-21.2-1797).
 

Technical data

anchor diameter           8 mm
collar diameter 16 mm
drill hole depth h1 ≥ 80 mm
anchorage depth hef ≥ 70 mm
screw drive TORX T30
use categories acc. to ETA A, B, C
European Technical Approval ETA-04/0064

 

Characteristic loads

concrete C 12/15 acc. to EN 206-1 1.5 kN
concrete C 16/20 - C 50/60 acc. to EN 206-1 1.5 kN
clay brick (Mz) acc. to DIN 105 1.5 kN
solid lime sandstone (KS) acc. to DIN EN 106 1.5 kN
solid brick of lightweight concrete (V) acc. to DIN 18152 0.9 kN
vertical coring brick (Hlz) acc. to DIN 105 1.2 kN
perforated lime sandstone (KSL) acc. to DIN EN 106 1.5 kN
hollow block of lightweight concrete (HbL) acc. DIN 18151 0.75 kN

Regarding design loads the national safety factors are to be incorporated.
Please observe the approval.
 

Product range

max. tolerance compensation(mm) nominal length (mm) product name
10 80 EJOT SDF-K plus 8 U x 080
30 100 EJOT SDF-K plus 8 U x 100
50 120 EJOT SDF-K plus 8 U x 120
70 140 EJOT SDF-K plus 8 U x 140
90 160 EJOT SDF-K plus 8 U x 160
110 180 EJOT SDF-K plus 8 U x 180

 

Installation